11-24-2013, 07:59 AM
Pages: 1 2
11-26-2013, 07:29 PM
Nice video, Micheus. 
I've posted it at wings3d facebook profile.
--------
Another approach to make the trumpet bell. This time using Circularize command (left mouse button).
The commands sequence is:
1. create a cylinder
2. select one of the circular faces
3. Scale Uniform
4. Change the selection to Edges (E)
5. Hit [E] again to expand the edge selection
6. Select|Deselect Previous
7. Cut the select edges in 9 pieces, for example (hit [9])
8. Connect the resultant edges hitting [C]
9. Expand the edge selections by hitting [E] once
10. Select|Deselect Previous
11. Edge|Circularize (LMB)
(harder to describe than execute)
I've posted it at wings3d facebook profile.--------
Another approach to make the trumpet bell. This time using Circularize command (left mouse button).
The commands sequence is:
1. create a cylinder
2. select one of the circular faces
3. Scale Uniform
4. Change the selection to Edges (E)
5. Hit [E] again to expand the edge selection
6. Select|Deselect Previous
7. Cut the select edges in 9 pieces, for example (hit [9])
8. Connect the resultant edges hitting [C]
9. Expand the edge selections by hitting [E] once
10. Select|Deselect Previous
11. Edge|Circularize (LMB)
(harder to describe than execute)
Pages: 1 2