+- Wings 3D Development Forum (https://www.wings3d.com/forum)
+-- Forum: Wings 3D (https://www.wings3d.com/forum/forumdisplay.php?fid=1)
+--- Forum: Interface & Usage (https://www.wings3d.com/forum/forumdisplay.php?fid=3)
+--- Thread: Bend: Quick Start tutorial (/showthread.php?tid=117)
Pages:
1
2
Bend: Quick Start tutorial - Fonte Boa - 12-18-2012
Oort and PeterChov: i've recorded two tutorials (sorry, one of them has 7 minutes....) thinking in you two. I would like to know if they have an effective result to appentice. The idea is a quick start: 1st one is about Bend|Plastic Bend, the 2nd one is about Clamped Bend|Plastic Bend.
Could you please try and tell me if you could repeat those steps???!!
Are them useful some way?
http://www.youtube.com/watch?v=_KH3zon-cvs&feature=youtu.be
http://www.youtube.com/watch?v=l_V06I0riQg&feature=youtu.be
1st step
"rod center" is the point that will remain static during Bend
2st step
"rod top" is where you put your hands to curve the bar, to use your force to Bend it
3rd step
"bend normal" is the direction of curve
Like this, in my mind (1, 2, 3 steps)
![[Image: bendbar.jpg]](http://img407.imageshack.us/img407/2150/bendbar.jpg)
RE: Bend: Quick Start tutorial - PeterC (PC) - 12-19-2012
Nice FB, could follow it no prob yea. I'm sure people will find 'em helpful.
I'm now even more convinced the current names are weird
Renaming Center and Top to From and To would make more sense as it is, though there might be cases where that wouldn't apply so we'd have to think that through..
That example pic isn't bad, don't forget #4, the other hand, currently "Bottom"
RE: Bend: Quick Start tutorial - Fonte Boa - 12-19-2012
(12-19-2012, 12:59 AM)PeterC (PC) Wrote: That example pic isn't bad, don't forget #4, the other hand, currently "Bottom"
Yes for Clamped Bend.
(and "top/botton" in this case,
the 2 addicional steps,
better define the restricted area that will be really deformed:
all the rest will be moved but without any deformation)
--------
"from" and "to" are very poor words to define all the math involved, no?
"center" and "top" are more adequated, no?
--------
a tip present in videos:
if you pick the references Bend asks you
by clicking on a edge,
try in this initial fase to keep using edges as element to define those points.
i used almost all the time Edges to indicate the 3 references to Wings bend that bar.
(there are MANY ways to pilot Bend)
This one is older: all was made by
.Bend Clamped. | Clamped Plastic Bend
showed in the 2nd video above.
All is a question of deal with Secondary Selections
and pick the elements that represent what user wants,
(specially the vector indicating the correct Bend direction)
that green dot and arrow
Practice: it is nice to try!
http://www.youtube.com/watch?v=H-j70zzX4j4
RE: Bend: Quick Start tutorial - oort - 12-19-2012
Fonte Boa,
Glad to see you post the last one here. It is great for showing the power of bend.
oort
The joys of Fonte Boa - maker - 12-20-2012
I came, I saw, I hankered (for more.) Bliss!
And found I knew only 1/10th as much as I'd thought. Unfortunately, I'm reaching the end of my ISP download quota. After this the browsing crawls.
RE: Bend: Quick Start tutorial - Fonte Boa - 12-20-2012
Now trying to make a Pivot Bend quick start. Just let me know if the steps are clear.
1. Center
2. Top
3. Pivot Axis
4. Pivot Location
http://www.youtube.com/watch?v=YxFSdz0DtWE
ps: i think these video tutorials can be more colored, no?!
RE: Bend: Quick Start tutorial - oort - 12-20-2012
Yes it is nice with the colors added.
I hope you did not stop using voice over due to my comment about the buzz in the audio...
oort
RE: Bend: Quick Start tutorial - PeterC (PC) - 12-20-2012
Neat, nice work :}
RE: Bend: Quick Start tutorial - Fonte Boa - 12-20-2012
Quote:I hope you did not stop using voice over due to my comment about the buzz in the audio..
No, my friend oortman: just a quick video recorded at the end of day at a job machine where there isnt a microphone. Dont worry, please!
Nice you liked the colors: me too!
Thanks, Peter!
I hope this can really work as a "quick start", it is all i would like.
RE: Bend: Quick Start tutorial - puzzledpaul - 12-20-2012
(12-20-2012, 08:40 PM)Fonte Boa Wrote: ps: i think these video tutorials can be more colored, no?!
Yep - I started a strip yesterday for one of the clamped options - with the straight portions being a different colour from the bent ones - viewer has an immediate visual idea of where stuff is -even before starting the op.
+ used hard edges (diff col) to show the rod centre elements and also for the axial edges on which the assorted points are located.
...but no need for my stuff now we've got 'the movies'
pp