[fixed] Performance

[Marcin Maćkowiak]

Thanks for your reply.
I need some time to test it. I will give you feed back in an haur.

---

OK so...

legend:
F - Faces
V - Vertex
O - Object
E - Edges

Started with 7000 faces - uses 200MB (memory)
I made some addons polygons and achived 100K faces - uses 260MB (memory)
Lagy but i can still play around without problems.
RMB dialog box for O/V/E - no problem with memory still 260MB with dialogbox open.
RMB dialog box for F - 900MB with dialogbox open.

Project saved. I exit Wings3d and restart it, Project loaded (100K) - 260MB
Rotation, draging etc. looks fresh and no lagy.
RMB dialog box for O/V/E - no problem with memory still 260MB with dialogbox open.
RMB dialog box for F - 360MB with dialogbox open.

I have added some polys - 500K faces - uses 470MB memory
Lagy but I can say it is normal for such a faces.
RMB dialog box for O/V/E - no problem with memory 550MB with dialogbox open.
RMB dialog box for F - over 5GB with dialogbox open.

Project saved. I exit Wings3d and restart it, Project loaded (500K) - 400MB
Rotation, draging etc. looks better and not so much lagy.
RMB dialog box for F - over 1,7GB with dialogbox open.
I made extrude option twice for one of the face (nothing special) and memory jumped over 4,2GB for F selection. After wings restart It is 1,5GB.

I made 4 extrudes, 3 undo levels and when I tried RMB dialog box Wings3d get "NO RESPOND" and over 13GB memory

Anyway one day I made 80K project left It minimized on my computer and after 2 hours when I came back to work around It was laggy as is`t before.

What do you thing about It? Is it normal that face selection needs more memory? And do you thing that Wings3d after some time needs to be restarted?