Circularise - possible issue

[micheus]

No, I din't. And I'm not sure It's something I can "fix". That is a simple situation and it's easy for us know what to do using our eyes and brain, but for not so simple geometry I'm not sure I could to code something so smart like we can be.

So, for situations like that - a workaround seems to be apply the area percentage for each group of faces. But, we have a problem: we have the area shown in the top information line just for one face selected - not a group.

In this case, we can workaround that issue by using the Tools->Scene Info where we can get some extra information about the objects and - in this case - we are interested in the object area.

Then, we use Shell Extrude->Normal without thickness to get two different objects:


In Scene Info we have the area for these objects that shows us the entire area of the object although we would need only half of it, but it doesn't matter since we are working with percentage values.
(A1)2.40+(A2)0.96 = 3.36 wu²
A1 multiplier => 2.40/3.36 = 0.7143
A2 multiplier => 0.96/3.36 = 0.2857

We don't need to use a calculator for that, in fact we can do all these calculus directly in the Input dialog:




By rotating one area to align with the other one we can see the result is good: