+- Wings 3D Development Forum (https://www.wings3d.com/forum)
+-- Forum: Wings 3D (https://www.wings3d.com/forum/forumdisplay.php?fid=1)
+--- Forum: Bug Reports (https://www.wings3d.com/forum/forumdisplay.php?fid=12)
+--- Thread: right click to remove .hole. from adjacent faces (/showthread.php?tid=230)
right click to remove .hole. from adjacent faces - Misty Wisty - 03-16-2013
doesn't seem to be working for me?
i'm coming from v95.5. Thought i'd try some basic commands on a sphere to try out the 1.4.1 version.
all the right-click .hole. seems to do is deselect the selected face.
is there any other way to un.hole. ?
is it possible to un.hole more than one face at a time?
thanks
ooops unhide faces works on holes! but only on the whole object.
would still be nice to un.hole adjacents.
RE: right click to remove .hole. from adjacent faces - micheus - 03-18-2013
(03-16-2013, 09:59 PM)Misty Wisty Wrote: all the right-click .hole. seems to do is deselect the selected face.I think you just made confusion about what command you had used, mainly considering this your comment in the thread Hide and Holes:
ooops unhide faces works on holes! but only on the whole object.
(03-17-2013, 12:18 AM)Misty Wisty Wrote: i would appreciate more space between hole and hide too.
Anyway, by trying to check what you were talking about, I found that if our object has any material assigned to any face [uv mapped], then we can get a crash by trying unhide a face - not necessary that one uv mapped or its neighbour.
Checked on wings3d_1.4.1.36.g53af2 and wings3d_1.5.pre1.74.g2aee
So, we have a bug around here.
Edit: fixed the text above
RE: right click to remove .hole. from adjacent faces - Geta-Ve - 03-19-2013
@misty:
Yes, if you Hole multiple faces that have any kind of surface variation other than flat, you will lose those faces completely. All the Unhole feature does is create a new planar face where the hole is, regardless of what was there before.
Unhide on the other hand will work as intended. Assuming of course you used the Hide command in the first place.
RE: right click to remove .hole. from adjacent faces - oort - 03-19-2013
I am starting to wonder if the new ".hole" is really better than using the old hole material. It is neat that you can create what looks like holes but since they are not real holes and they confuse new users maybe it is not a good thing.
Also, there is the limitation of not being able to restore the original geometry where the .hole was added if there are more than a couple of faces that were turned into .hole. If all faces could be restored it would be okay.
Not sure what kind of nightmares of backward/forward compatibility this would create?? It is like the "New Coke" of Wings3D...
oort
RE: right click to remove .hole. from adjacent faces - Geta-Ve - 03-19-2013
@oort:
See my thread Hide and Holes.
RE: right click to remove .hole. from adjacent faces - oort - 03-19-2013
I assume you mean this thread... Hide and Holes... see you there...
oort
RE: right click to remove .hole. from adjacent faces - micheus - 06-26-2013
Just updating...
The bug fix should be available in the next release of Wings3d - some bugs fixed.